host

Enters the configuration context of a remote device using its hostname

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

host <DEVICE-NAME>

Parameters

host <DEVICE-NAME>


<DEVICE-NAME>	Specify the device‘s hostname. All discovered devices are displayed when ‘Tab‘ is pressed to auto complete this command.

Examples

NOC-NX9500(config)#host [TAB]
ap7522-8330A4                ap8163-74B45C
default/ap7522-8330A4        default/ap8163-74B45C
default/NOC-NX9500           default/RFS6K-SITE1-VLAN20
NOC-NX9500                   RFS6K-SITE1-VLAN20
RFS6K-SITE2-VLAN192          default/RFS6K-SITE2-VLAN192
NOC-NX9500(config)#host ap7522-8330A4
NOC-NX9500(config-device-84-24-8D-83-30-A4)#