controller-assisted-mobility
Enables controller or service platform assisted mobility to
determine a wireless client‘s VLAN assignment. When enabled, a controller or service
platform‘s mobility database is used to assist in roaming between RF Domains. This option
is disabled by default.
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
controller-assisted-mobility
Examples
ap505-13403B(config-wlan-test)#controller-assisted-mobility
ap505-13403B(config-wlan-test)#show context
wlan test
ssid test
vlan 1
bridging-mode local
encryption-type ccmp
authentication-type sae-psk
protected-mgmt-frames optional
controller-assisted-mobility
ap505-13403B(config-wlan-test)#
Related Commands
| no (wlan-config-mode) |
Disables controller or service platform assisted mobility to determine a
wireless client‘s VLAN assignment |
