no (meshpoint-config)

Negates meshpoint commands or resets their values to default

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

no [allowed-vlans|beacon-format|control-vlan|description|force|meshid|root|
security-mode|shutdown]

no data-rates [2.4GHz|5GHz|6GHz]

no force peer-paths-through-root

no neighbor inactivity-timeout

no use [aaa-policy|meshpoint-qos-policy]

no wpa2 [eap|key-rotation|psk]

no wpa2 eap [auth-type|identity|peap-mschapv2|tls trustpoint]

no wpa2 key-rotation [broadcast|unicast]

no wpa2 psk

no service allow-ht-only

Parameters

no <PARAMETERS>


no <PARAMETERS>	Removes or reverts this meshpoint settings to default based on the parameters passed

Examples

nx9500-6C8809(config-meshpoint-test)#show context
meshpoint test
 description "This is an example of a meshpoint description"
 meshid TestingMeshPoint
 shutdown
 beacon-format mesh-point
 control-vlan 1
 allowed-vlans 1,10-16,18-23
 neighbor inactivity-timeout 300
 data-rates 2.4GHz bgn
 data-rates 5GHz an
 security-mode psk
 wpa2 psk 0 Test Company
 wpa2 key-rotation unicast 1200
 wpa2 key-rotation broadcast 600
 root
nx9500-6C8809(config-meshpoint-test)#

nx9500-6C8809(config-meshpoint-test)#no allowed-vlans

nx9500-6C8809(config-meshpoint-test)#no beacon-format

nx9500-6C8809(config-meshpoint-test)#no control-vlan

nx9500-6C8809(config-meshpoint-test)#no description

nx9500-6C8809(config-meshpoint-test)#no meshid

nx9500-6C8809(config-meshpoint-test)#no root

nx9500-6C8809(config-meshpoint-test)#no security-mode

nx9500-6C8809(config-meshpoint-test)#show context
meshpoint test
 beacon-format mesh-point
 control-vlan 1
 neighbor inactivity-timeout 300
 data-rates 2.4GHz bgn
 data-rates 5GHz an
 security-mode none
 wpa2 psk 0 Test Company
 wpa2 key-rotation unicast 1200
 wpa2 key-rotation broadcast 600
 no root

nx9500-6C8809(config-meshpoint-test)#no data-rates 2.4GHz

nx9500-6C8809(config-meshpoint-test)#no data-rates 5GHz

nx9500-6C8809(config-meshpoint-test)#show context
meshpoint test
 beacon-format mesh-point
 control-vlan 1
 neighbor inactivity-timeout 300
 security-mode none
 wpa2 psk 0 Test Company
 wpa2 key-rotation unicast 1200
 wpa2 key-rotation broadcast 600
 no root
nx9500-6C8809(config-meshpoint-test)#

rfs4000-229D58(config-meshpoint-test)#show context
meshpoint test
 meshid test
 beacon-format mesh-point
 control-vlan 1
 security-mode none
 no root
 force peer-paths-through-root
rfs4000-229D58(config-meshpoint-test)#

rfs4000-229D58(config-meshpoint-test)#no force peer-paths-through-root

rfs4000-229D58(config-meshpoint-test)#show context
meshpoint test
 meshid test
 beacon-format mesh-point
 control-vlan 1
 security-mode none
 no root
rfs4000-229D58(config-meshpoint-test)#