zone
Profile Config Commands
Configures the zone for devices using this profile. The zone can also be configured on the device‘s self context.
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Parameters
zone <NAME>
| zone <NAME> |
Configures the device‘s zone/area
- <NAME> – Specify the zone/areaname.
|
Example
nx9500-6C8809(config-profile-testNX9000)#szone Ecospace
nx9500-6C8809(config-profile-testNX9000)#show context include-factory | include
zone
zone Ecospace
nx9500-6C8809(config-profile-testNX9000)#
Related Commands
| no |
Removes the zone configured on this profile or device |
