server-unreachable
Configures the action taken in case the
classification server is unreachable. Based on the value configured the an end user‘s request
for a URL/Website is either blocked or passed.
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
server-unreachable [block|pass]
Parameters
server-unreachable [block|pass]
| server-unreachable [block|pass] |
Configures the action taken in case the classification
server is unreachable. The options are:
- block – Denies access to the requested URL/Website
- pass – Allows access to the requested URL/Website. This is the default
value.
|
Examples
nx9500-6C8809(config-web-filter-policy-test)#server-unreachable block
nx9500-6C8809(config-web-filter-policy-test)#show context
web-filter-policy test
cache-max-recs 9000
cache-save-interval 1000
server-unreachable block
server-host ip-address 192.168.13.13
nx9500-6C8809(config-web-filter-policy-test)#
