t5-security
Configures T5 PowerBroadband security
settings. A T5 controller uses the IPX operating system to manage its connected radio devices,
as opposed to the WiNG operating system used by wireless controllers and service platforms.
However, a T5 controller, once enabled as a supported external device, can provide data to
WiNG to assist in a T5‘s management within the WiNG supported subnet populated by both types
of devices. The CPEs are the T5 controller managed radio devices using the IPX operating
system. These CPEs use a DSL as their high speed Internet access mechanism using the CPE‘s
physical wallplate connection and phone jack.
Note
This setting is applicable only when this
WLAN supports T5 controllers and their connected CPEs.
Supported in the following platforms:
- Service Platforms — NX5500, NX7500,
NX9500, NX9600, VX9000
Syntax
t5-security [static-wep|wpa-enterprise|wpa-personal]
t5-security static-wep encryption-type [wep128|wep64] [hex <STRING>|passphrase <STRING>]
t5-security [wpa-enterprise|wpa-personal] encryption-type [ccmp|tkip|tkip-ccmp]
version [mixed|wpa|wpa2]
Parameters
t5-security static-wep encryption-type [wep128|wep64] [hex <STRING>|passphrase <STRING>]
| t5-security static-wep |
Configures the T5 WLAN security type as static-wep |
| encryption-type [wep128|wep64] |
Applies one of the following encryption algorithms to the T5 support WLAN
configuration: WEP64 or WEP128 |
| hex <STRING> |
Configures the hex password (used to derive the security
key)
- <STRING> – Specify the hex password (should not exceed the 10 - 26
characters).
|
| passphrase <STRING> |
Configures the passphrase shared by both transmitting
and receiving authenticators
- <STRING> – Specify the passphrase. It could either be an alphanumeric
string of 8 to 63 ASCII characters or 64 HEX characters. The alphanumeric string
allows character spaces. This string is converted to a numeric value.
Configuring a passphrase saves you the need to create a 256-bit key each time
keys are generated.
|
t5-security [wpa-enterprise|wpa-personal] encryption-type [ccmp|tkip|tkip-ccmp]
version [mixed|wpa|wpa2]
| t5-security [wpa-enterprise| wpa-personal] |
Configures the T5 WLAN security type as: wpa-enterprise OR wpa-personal |
| encryption-type [ccmp|tkip|tkip-ccmp] |
The following parameters are common to the
wpa-enterprise and wpa-personal keywords:
- [ccmp|tkip|tkip-ccmp] – Applies
one of the following encryption algorithms to the T5 support WLAN configuration:
CCMP, TKIP, or TKIP-CCMP.
|
| version [mixed|wpa|wpa2] |
The following parameters are common to the
wpa-enterprise and wpa-personal keywords:
- version – Applies one of the
following encryption schemes to the T5 support WLAN configuration: WPA, WPA2, or mixed.
|
Examples
nx9500-6C8809(config-wlan-test)#t5-security wpa-enterprise encryption-type ccmp version wpa
nx9500-6C8809(config-wlan-test)#show context
wlan test
ssid test
bridging-mode local
encryption-type none
authentication-type none
t5-security wpa-enterprise encryption-type ccmp version wpa
t5-client-isolation
nx9500-6C8809(config-wlan-test)#
