location
Configures the RF Domain's physical
location. The location could be as specific as the building name or floor number. Or it
could be generic and include an entire site. The location defines the physical area where a
common set of device configurations are deployed and managed by an RF Domain
policy.
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Parameters
location <WORD>
| location <WORD> |
Configures the RF Domain location by specifying the area or building
name
- <WORD> – Specify
the location.
|
Examples
nx9500-6C8809(config-rf-domain-default)#location SanJose
nx9500-6C8809(config-rf-domain-default)#show context
rf-domain default
location SanJose
contact Bob+14082778691
country-code us
channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10
layout area Ecospace floor Floor1 map-location www.firstfloor.com units meters
control-vlan 1
nx9500-6C8809(config-rf-domain-default)#
