lldp

Displays Link Layer Discovery Protocol (LLDP) related information

Supported on the following devices:

Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

show lldp [neighbors|report]

show lldp neighbors {on <DEVICE-NAME>}

show lldp report {detail|on}

show lldp report {detail} {(on <DEVICE-OR-DOMAIN-NAME>)}

Parameters

show lldp neighbors {on <DEVICE-NAME>}


lldp	Displays L2TPv3 neighbors table or aggregated LLDP neighbors table
neighbors	Displays LLDP neighbors table
on <DEVICE-NAME>	Optional. Displays L2TPv3 neighbors table on a specified device <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.

show lldp report {detail} {(on <DEVICE-OR-DOMAIN-NAME>)}


lldp	Displays L2TPv3 neighbors table or aggregated LLDP neighbors table
report detail	Displays aggregated LLDP neighbors table detail – Optional. Displays detailed aggregated LLDP neighbors table Note: If the ‘on‘ keyword is used without the ‘detail‘ keyword, the system displays LLDP neighbors table summary on the specified device or RF Domain.
on <DEVICE-OR-DOMAIN-NAME>	The following keyword is recursive and common to the ‘report detail' parameter: on <DEVICE-OR-DOMAIN-NAME> – Displays aggregated LLDP neighbors table on a specified device or RF Domain <DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF Domain.

Examples

nx9500-6C8809#show lldp neighbors
-------------------------
Chassis ID: 00-18-71-D0-0B-00
System Name: TechPubs-ProCurve-Switch
Platform: ProCurve J8697A Switch 5406zl, revision K.12.1X, ROM K.11.03 (/sw/code/build/btm(sw_esp1))
Capabilities: Bridge  Router
Enabled Capabilities: Bridge
Local Interface: ge1, Port ID(Port Description) (outgoing port): 5(A5)
TTL: 113 sec
Management Addresses: 192.168.13.40
nx9500-6C8809#