evaluate-always
Sets flag to run this auto-provisioning policy every time an
access point is adopted. The access point‘s previous adoption status is not taken into
consideration.
Supported on the following devices:
- Access Points: AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Examples
nx9500-6C8809(config-auto-provisioning-policy-test)#evaluate-always
nx9500-6C8809(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
default-adoption
evaluate-always
deny ap8432 precedence 1 mac 74-67-F7-07-02-35
deny ap8432 precedence 2 ip 192.168.13.24 102.168.13.26
adopt ap8432 precedence 5 profile default-ap8432 rf-domain TechPubs vlan 1
nx9500-6C8809(config-auto-provisioning-policy-test)#
Related Commands
| no |
Disables the running of this policy every time an
AP is adopted |
