If you are connecting to a device controller through the serial port, use the following settings to configure the terminal emulator:
| Bits Per Second |
19200 - For NX5500, NX7500, NX9500, and NX9600 service platforms 19200 - For CX9000 and VX9000 virtual platforms 115200 - For AP5010, AP310, AP410, AP460, AP505, AP510, AP560, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, and AP8533 access points |
| Data Bits | 8 |
| Parity | None |
| Stop Bit | 1 |
| Flow Control | None |