send-community (bgp-neighbor-config)
Enables sending of the community attribute to the BGP neighbor. The
community attribute groups destinations in a certain community and applies routing decisions
based on the community. On receiving community attribute, the BGP router announces it to the
neighbor.
Supported in the following platforms:
- Service Platforms — NX9500, NX9600
Syntax
send-community [both|extended|standard]
Parameters
send-community [both|extended|standard]
| send-community [both|extended|standard] |
Enables sending of the community attributes to the BGP
neighbor
- both – Sends extended and standard community attributes
- extended – Sends extended community attributes only
- standard – Sends standard community attributes only
|
Examples
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#send-community both
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#show context
bgp neighbor 192.168.13.99
remote-as 100
advertisement-interval 100
peer-group eBGPPeerGrp1
port 21
allowas-in 10
attribute-unchanged as-path
capability orf prefix-list both
default-originate
description neighbor "This neighbor is an external AS neighbor"
disable-connected-check
dont-capability-negotiate
ebgp-multihop 20
enforce-multihop
local-as 20 no-prepend
maximum-prefix 400 50 warning-only
next-hop-self
override-capability
passive
password neighbor eBGPneighbor@300
remove-private-as
route-server-client
send-community both
nx9500-6C8809(config-profile testNX9000-router-bgp-neighbor-192.168.13.99)#
