System Properties Commands

Note

Module, slot, and certain other hardware-based parameters in the Extreme Networks S- K- and 7100-Series Standalone CLI support only chassis based S- and K-Series devices, such as the K10 and K6 K-Series chassis and the S8, S4, or S3 S-Series chassis. Executing commands in the Standalone CLI with modular parameters not supported by the Standalone will result in an error message.

This chapter provides detailed information for the system properties set of commands for the S- K- and 7100-Series platforms. System properties functionality includes: how to display and set the system IP address and other basic system (device) properties, including time, contact name andalias, physical asset IDs for modules, terminal output, timeout, and version information. For information about configuring system properties, refer to System Configuration in the S-, K-, and 7100 Series Configuration Guide.