Use this command to enable or disable MVRP globally on the device or on one or more ports.
| enable | disable | Enables or disables MVRP on the device or specified port(s). Default: Enabled globally; Disabled at the port level. |
| port-string | (Optional) Enables or disables MVRP on specific port(s). For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide. |
By default MVRP is globally enabled and disabled on all ports.
If port-string is not specified, MVRP will be globally enabled or disabled.
All command modes.
Global MVRP status determines the flood behavior for MVRP PDUs on the chassis. MVRP and GVRP can not be enabled on the same port. You must first ensure that GVRP is disabled on a port before attempting to enable MVRP. GVRP is disabled by default at the port level.
This example shows how to enable MVRP globally on the device:
System(rw)->set mvrp enable
This example shows how to disable MVRP globally on the device:
System(rw)->set mvrp disable
This example shows how to enable MVRP on all ports:
System(rw)->set mvrp enable *.*.*
Print
this page
Email this topic
Feedback
View PDF
Download EPUB