show physical assetid

Use this command to display the asset ID for a module.

Syntax

S- and K-Series

show physical assetid {chassis chassis | module module | sub-module slot module | powersupply powersupply | poe-powersupply poe-powersupply | fan fan}

7100-Series

show physical assetid {chassis chassis | module module | powersupply powersupply | fan fan}

Parameters

chassis `chassis`	Specifies the display of the chassis asset ID.
module `module`	Specifies the module for which to display the asset ID.
sub-module `slot` `module`	Specifies the sub-module installed in its parent module expansion slot for which to display an asset ID. slot specifies the chassis slot the parent module is installed in. module specifies the sub-module ID (S-, K-Series).
powersupply `powersupply`	Specifies the power supply for which to display the asset ID.
poe-powersupply `poe-powersupply`	Specifies the POE power supply for which to display the asset ID (S-, K-Series).
fan `fan`	Specifies the fan for which to display the asset ID.

Defaults

None.

Mode

All command modes.

Usage

The sub-module and poe-powersupply options are suppored on the S- and K-Series platforms.

Example

This example sets the module 1 asset ID to documentation and shows how to display asset ID information for module 1:

System(rw)->set physical assetid module 1 documentation
System(rw)->show physical assetid module 1
Name                    AssetId                               Index
----------------------- -------------------------------- ----------
module-1                documentation                      10011001
System(rw)->

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback