show garp timer

Example

This example shows how to display GARP timer information on ports 1 through 10:

Note

For a functional description of the terms join, leave, and leaveall timers, refer to the standard IEEE 802.1Q documentation, which is not supplied with this device.

System(rw)->show garp timer ge.1.1-10
 Port based GARP Configuration: (Timer units are centiseconds)
 Port Number     Join        Leave     Leaveall
 -----------  ----------  ----------  ----------
 ge.1.1             20          60        1000
 ge.1.2             20          60        1000
 ge.1.3             20          60        1000
 ge.1.4             20          60        1000
 ge.1.5             20          60        1000
 ge.1.6             20          60        1000
 ge.1.7             20          60        1000
 ge.1.8             20          60        1000
 ge.1.9             20          60        1000
 ge.1.10            20          60        1000

show garp timer configuration Output Details provides an explanation of the command output. For details on using the set garp timer command to change default timer values, refer to set garp timer.

show garp timer configuration Output Details

Output...	What it displays...
Port Number	Port designation. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide.
Join	Join timer setting.
Leave	Leave timer setting.
Leaveall	Leavall timer setting.