Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set spantree portadmin

Use this command to disable or enable the Spanning Tree algorithm on one or more ports.

Syntax

set spantree portadmin port-string {disable | enable}

Parameters

port-string Specifies the port(s) for which to enable or disable Spanning Tree. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide.
disable | enable Disables or enables the Spanning Tree algorithm on the specified port(s).

Defaults

None.

Mode

All command modes.

Example

This example shows how to disable Spanning Tree on ge.1.5:

System(rw)->set spantree portadmin ge.1.5 disable
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page