Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set flowlimit port

Use this command to enable or disable flow limiting on one or more port(s).

Syntax

set flowlimit port {enable | disable} [port-string]

Parameters

enable | disable Enables or disables flow limiting on specified ports.
port-string (Optional) Specifies port(s) on which to configure flow limiting parameters.

Defaults

If port-string is not specified, settings will apply to all ports.

Mode

All command modes.

Example

This example shows how to enable flowlimits on the GbE slot 2 ports 3 - 5:

System(rw)->set flowlimit enable ge.2.3-5
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page