Use this command to display the status of each neighbors warning type for all or specified ports.
| port-string | (Optional) Displays the status of each neighbor warning type for the specified port(s). For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide. |
If the port-string is not specified, neighbor warning type status is displayed for all ports.
All command modes.
This example shows how to display the status of each neighbor warning type for ports ge.1.1-5:
Print
this page
Email this topic
Feedback
View PDF
Download EPUBSystem(rw)->show neighbors warning-detection ge.1.1-5
* Means protocol is supported and enabled for warning detection
o Means protocol is supported for warning detection
Port | LLDP | CISCO | LLDPV2 |
|med-poe|duplx pwr mtu|mac-phy pwr mtu lag pfc|
--------- ------- ----- --- --- ------- --- --- --- ---
ge.1.1 o o o o * * * o o
ge.1.2 o o o o * * * o o
ge.1.3 o o o o * * * o o
ge.1.4 o o o o * * * o o
ge.1.5 o o o o * * * o o