clear cos port-resource txq

Use this command to clear one or all Class of Service transmit queue port resource entry.

Syntax

clear cos port-resource txq {all | group-type-index resource} [unit] [rate] [algorithm]

all \| `group-type-index`	Clears all transmit queue port resource entries or a specific entry. Valid group-type entries are in the form of group.type. Group can be 0 - 11, with 0 designating the default group, and 1 - 11 reserved for user-defined groups. Port type can be 0 - 1 for the S- and K-Series and 0 for the 7100-Series.
`resource`	Specifies a single or range resource entries to be cleared.
unit	(Optional) Clears unit of measure settings.
rate	(Optional) Clears rate settings.
algorithm	(Optional) Clears the taildrop algorithm setting.

If no options are specified, all associated non-default settings will be cleared.

All command modes.

This S- and K-Series example shows how to clear all port resource settings associated with Class of Service transmit queue 1 in port group 0.1:

System(rw)->clear cos port-resource txq 0.1 1

This 7100-Series example shows how to clear all port resource settings associated with Class of Service transmit queue 1 in port group 0.0:

System(rw)->clear cos port-resource txq 0.0 1

Published May 2016prev | next