Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear vlan interface

Use this command to clear the MIB-II interface entry mapped to a VLAN.

Syntax

clear vlan interface vlan-list

Parameters

vlan-list Specifies the VLAN(s) for which an interface entry will be cleared.

Defaults

None.

Mode

All command modes.

Example

This example shows how to clear the interface entry mapped to VLAN 1:

System(rw)->clear vlan interface 1
System(rw)->show vlan interface
VLAN MIB-II Interfaces
Max Interfaces     : 16
Current Interfaces : 0
VLAN       Port          Storage Type
-------------------------------------
There are no VLANs mapped to a MIB-II interface.
System(rw)->
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page