Use this command to enable or disable Open Shortest Path First (OSPF) configuration mode.
| process-id | Specifies the process ID, an internally used identification number for an OSPF routing process run on a router. Multiple OSPF processes are configurable per router. Valid values are 1 to 65535. |
None.
Configuration command.
You must execute the router ospf command to enable the protocol before completing many OSPF-specific configuration tasks.
Multiple OSPF processes (process-id) are allowed per router. The S- K- and 7100-Series routers support 4 OSPF processes per VRF and 16 OSPF processes per router.
The “no” form of this command disables OSPF configuration mode.
This example shows how to enable routing for OSPF process 1:
System(rw)->configure System(rw-config)->router ospf 1 System(rw-config-ospf-1)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB