clear bonding mac

Use this command to reset the VSB system MAC address to its default value.

Syntax

clear bonding mac

Parameters

None.

Defaults

VSB MAC address defaults to an internal MAC address associated with VSB chassis 1.

Mode

All command modes.

Usage

This command resets a manually configured MAC address to the default MAC address for the VSB system. By default, VSB sets the VSB system MAC address to an internal MAC address associated with VSB chassis 1.

Note

Note

Once a VSB system has been globally enabled using the set bonding enable command, the VSB system MAC address can not be modified. The clear bonding mac command can only be used prior to globally enabling VSB on the system.

Example

This example clears the manually configured MAC address for the pre-globally enabled VSB system:

System(rw)->clear bonding mac