clear port lacp

Use this command to clear link aggregation settings for one or more ports.

Syntax

clear port lacp port port-string {[aadminkey] [aportpri] [asyspri] [aadminstate {lacpactive | lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef | lacpexpire | all}] [padminsyspri] [padminsysid] [padminkey] [padminportpri] [padminport] [padminstate {lacpactive | lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef | lacpexpire | all}]}

Parameters

port `port-string`	Specifies the physical port(s) on which LACP settings will be cleared.
aadminkey	Clears a port‘s actor admin key.
aportpri	Clears a port‘s actor port priority.
asyspri	Clears the port‘s actor system priority.
aadminstate lacpactive \| lacptimeout \| lacpagg \| lacpsync \| lacpcollect \| lacpdist \| lacpdef \| lacpexpire \| all	Clears a port‘s specific actor admin state, or all actor admin state(s). For descriptions of specific states, refer to the set port lacp command (set port lacp.)
padminsyspri	Clears the port‘s default partner priority value.
padminsysid	Clears the port‘s default partner system ID.
padminkey	Clears the port‘s default partner admin key.
padminportpri	Clears the port‘s default partner port priority.
padminport	Deletes a partner port from the LACP configuration.
padminstate lacpactive \| lacptimeout \| lacpagg \| lacpsync \| lacpcollect \| lacpdist \| lacpdef \| lacpexpire \| all	Clears the port‘s specific partner admin state, or all partner admin state(s).

Defaults

None.

Mode

All command modes.

Example

This example shows how to clear all link aggregation parameters for port ge.3.16:

System(rw)->clear port lacp port ge.3.16

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback