Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear access-lists counters

Use this command to clear access list display counters.

Syntax

clear access-lists counters [name | applied [host | interfaces [vlan vlan-id] [inbound | outbound | in-and-out]]

Parameters

name (Optional) Clears display counters for the specified access list number or name.
applied interfaces (Optional) Clears display counters for applied host or interface statistics only.
vlan | inbound | outbound | in-and-out (Optional) Clears only VLAN, only inbound, only outbound, or both inbound and outbound.

Defaults

If no option is specified, the clear action is applied to all access lists.

Mode

All command modes.

Example

This example clears the display counters for L2 ACL list2:

System(rw-config)->clear access-lists counters list2
System(rw-config)->

Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page