Use this command to place the probe in service and put its associated sessions on the scheduling queue.
None.
A probe is not in service by default.
Timing probe configuration mode.
Use the no inservice command to set the probe to not-in-service. Probe configuration remains unchanged. Use the no probe command to delete a probe. A probe is not in service by default.
Taking a probe out-of-service removes its sessions from the Tracked Object Manager‘s scheduler. Putting a probe in service adds its sessions to the Tracked Object Manager‘s scheduler.
This example creates the ICMP timing probe named ICMP_STATS, enters probe timing configuration mode, then puts the probe in service.
System(su)->configure System(su-config)->probe ICMP_STATS icmp timing System(su-config-probe-timing)->inservice
Print
this page
Email this topic
Feedback
View PDF
Download EPUB