Use this command to set the PoE usage threshold on a specified module.
| usage-threshold | Specifies a PoE threshold as a percentage of total system power usage. Valid values are 1–99. |
| module-number | Specifies the module on which to set the PoE threshold. If you are configuring this value on an S-Series SSA, use 1 as the module number. |
None.
All command modes.
This example shows how to set the PoE threshold to 50 on module 1:
System(rw)->set inlinepower threshold 50 1
Print
this page
Email this topic
Feedback
View PDF
Download EPUB