set lldp port status

Use this command to enable or disable transmitting and processing received LLDPDUs on a port or range of ports.

Syntax

set lldp port status {tx-enable | rx-enable | both | disable} port-string

tx-enable	Enables transmitting LLDPDUs on the specified ports.
rx-enable	Enables receiving and processing LLDPDUs from remote systems on the specified ports.
both	Enables both transmitting and processing received LLDPDUs on the specified ports.
disable	Disables both transmitting and processing received LLDPDUs on the specified ports.
`port-string`	Specifies the port or range of ports to be affected.

None.

All command modes.

This example enables both transmitting LLDPDUs and receiving and processing LLDPDUs from remote systems on ports ge.1.1 through ge.1.6.

System(rw)->set lldp port status both ge.1.1-6

Published May 2016prev | next