Use this command to initialize access control for this port.
| port-string | (Optional) Port or range of ports. |
If a specific port or range of ports is not selected, the reinitialization setting is applied to all ports.
All command modes.
Using this command causes the port to reinitialize. Authentication exchanges and MKA operation is terminated and potentially restarted. For physical ports, any associated instantiated virtual ports are deleted. Use normal protocol operations to re‐instantiate virtual ports.
This example shows how to reinitialize port "ge.1.10":
System(rw)->set macsec init ge.1.10
Print
this page
Email this topic
Feedback
View PDF
Download EPUB