clear vlan egress

Use this command to remove ports from a VLAN‘s egress list.

Syntax

clear vlan egress vlan-list port-string [forbidden]

`vlan-list`	Specifies the number of the VLAN from which a port(s) will be removed from the egress list.
`port-string`	Specifies one or more ports to be removed from the VLAN egress list of the specified vlan-list. For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide.
forbidden	(Optional) Clears the forbidden setting from the specified port(s) and resets the port(s) as able to egress frames if so configured by either static or dynamic means.

If forbidden is not specified, tagged and untagged settings will be cleared.

All command modes.

This example shows how to remove port 14 from the egress list of VLAN 9:

System(rw)->clear vlan egress 9 ge.3.14

This example shows how to remove all ports in slot 2 from the egress list of VLAN 4:

System(rw)->clear vlan egress 4 ge.2.*

Published May 2016prev | next