set security profile

Use this command to set the device‘s security profile.

Syntax

set security profile {c2 | normal}

Parameters

c2	Specifies that the security profile is set to be optimized for Command and Control environments.
normal	Specifies that the security profile is set for the default security settings (default).

Defaults

None.

Mode

All command modes, Super User.

Usage

C2 security profile mode can affect the range, default, and access to certain commands. Individual command details specify any changes related to enabling C2 security profile mode.

Changing the security mode of the switch requires a system reset.

Example

This example shows how to set the security profile to C2:

System(su)->set security profile c2
This command will reset the system.  Are you sure you want to continue? (y/n) [n]?n
System(su)->

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback