clear igmp protocols

Use this command to clear the current IGMP classification setting of an IP protocol ID and return the IP protocol to its default IGMP classification.

Syntax

clear igmp protocols {protocol-id protocol-id}

Parameters

protocol-id protocol-id

The IP protocol ID or range of IDs to change (3–57,59–255).

Defaults

None.

Mode

All command modes.

Usage

This command clears the IGMP classification setting of a specified IP protocol or all IP protocols and returns the IP protocol to its default IGMP classification as follows:

Multicast data is the default IGMP classification for IP protocol 17.
Routing protocol is the default IGMP classification for IP protocols 3, 7 - 9, 42 - 43, 45, 47 - 48, 85 - 86, 88 - 89, 91 - 92, 100, 103, 112.
Ignore is the default IGMP classification for IP protocols 4 - 6, 10 - 16, 18 - 41, 44, 46, 49 - 57, 59 - 84, 87, 90, 93 - 99, 101 - 102, 104 - 111, 113 - 255.

Example

This example shows how to return TCP frames, identified by protocol ID 6, to their default IGMP classification (ignore):

System(rw)->clear igmp protocols protocol-id 6 modify

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback