debug ip bgp (S-Series)

Use this command to enable the debug IP BGP utility for monitoring BGP timers, messages and routes.

Syntax

debug ip bgp {keepalive | notification | open | route-refresh | route-add | route-ineligible | route-remove | update | dampen | timer}

no debug ip bgp {keepalive | notification | open | route-refresh | route-add | route-ineligible | route-remove | update | dampen | timer}

keepalive	Specifies the monitoring of BGP keepalive messages.
notification	Specifies the monitoring of BGP notification messages.
open	Specifies the monitoring of BGP open messages.
route-refresh	Specifies the monitoring of BGP route-refresh messages.
route-add	Specifies the monitoring of BGP routes added to the local rib.
route-ineligible	Specifies the monitoring of BGP rib-in routes deemed ineligible for decision process.
route-remove	Specifies the monitoring of BGP routes removed from the local rib.
update	Specifies the monitoring of BGP update messages.
dampen	Specifies the monitoring of BGP route flap dampening events.
timer	Specifies the monitoring of BGP keepalive and hold timer events.

None.

Configuration command mode.

The “no” form for this command disables BGP debugging for the specified option.

This example shows how to set the debug IP BGP utility to monitor route refresh messages:

System(rw-config)->debug ip bgp route-refresh
System(rw-config)->

Published May 2016prev | next