Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear openflow controller

This command deletes controller configuration(s). You can specify all controllers, all active controllers, all passive controllers, or a specific active controller.
clear openflow controller { [all] | [active] | [passive] | [Ipv4 Address] }

Parameters

all Clears all OpenFlow controllers.
active Clears all active controllers.
passive Clears all active controllers.
Ipv4 Address IPv4 address of the single active controller you want to delete.

Defaults

N/A

Mode

All command modes.

Example

This example clears all OpenFlow controllers.

clear openflow controller all
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page