Use this command to set the broadcast suppression limit, in packets per second, on one or more ports.
| port-string | Specifies the port(s) for which to set broadcast suppression. |
| threshold-val | Sets the number of packets allowed to be received per second threshold on broadcast traffic. Maximum value is 1488100. If set to the maximum value, thresholding will be disabled. Default value: 1488100. |
None.
All command modes.
Broadcast suppression sets a threshold on the broadcast traffic that is received and switched out to other ports.
This example shows how to set broadcast suppression to 800 packets per second on ports ge.1.1 through 5:
System(rw)->set port broadcast ge.1.1-5 800
Print
this page
Email this topic
Feedback
View PDF
Download EPUB