reuse

Use this command to specify the route penalty value below which a suppressed route is reused.

Syntax

reuse value
no reuse

Parameters

value Specifies the route penalty value below which a suppressed route is reused. Valid values are 1 - 10000. The default value is 50.

Defaults

None.

Mode

Dampen Flap Configuration.

Usage

The “no” form of this command resets the reuse value to the default value of 50.

Example

The following example configures the reuse value to be 75.

System(su-config)->dampen-flap rfd1
System(su-config-dampen-flap)->reuse 75