show bonding

Example

This example displays VSB information for a VSB made up of 8 chassis fg.x.1 of each chassis is interconnected with fg.x.2 of the next chassis, closing the ring by interconnecting fg.8.1 with fg.1.2:

System(rw)->show bonding
Global Bonding State    : enabled
Max Bonded Chassis      : 8
Max Bonded System Slot  : 8
Slots active in System  : 1-8
Bonding Admin System MAC: 00-00-71-00-00-71
Bonding Oper System MAC : 00-00-71-00-00-71
Link Failure Response   : disabled
          System                              Shared   LFR      Active Slot IDs
Chassis Identifier  Serial Number  Status     Secret Priority  For This Chassis
------- ---------- --------------- ---------- ------ -------- -----------------
   1           999 133901906843    up             no       10                 1
   2           999 124700016845    up             no       20                 2
   3           999 13190048685E    up             no       30                 3
   4           999 13170490685E    up             no       40                 4
   5           999 133901906842    up             no       50                 5
   6           999 133903556842    up             no       60                 6
   7           999 133901906844    up             no       70                 7
   8           999 133901906846    up             no       80                 8
Port          Admin    Partner       Oper     Oper
              Status   Port          Mode     Status
------------- -------- ------------- -------- ----------------
fg.1.1        enabled  fg.2.2        bonding  up
fg.1.2        enabled  fg.8.1        bonding  up
fg.2.1        enabled  fg.3.2        bonding  up
fg.2.2        enabled  fg.1.1        bonding  up
fg.3.1        enabled  fg.4.2        bonding  up
fg.3.2        enabled  fg.2.1        bonding  up
fg.4.1        enabled  fg.5.2        bonding  up
fg.4.2        enabled  fg.3.1        bonding  up
fg.5.1        enabled  fg.6.2        bonding  up
fg.5.2        enabled  fg.4.1        bonding  up
fg.6.1        enabled  fg.7.2        bonding  up
fg.6.2        enabled  fg.5.1        bonding  up
fg.7.1        enabled  fg.8.2        bonding  up
fg.7.2        enabled  fg.6.1        bonding  up
fg.8.1        enabled  fg.1.2        bonding  up
fg.8.2        enabled  fg.7.1        bonding  up
System(rw)->

show bonding Output Details provides an explanation of the command output.

show bonding Output Details

Output...	What it displays...
Global Bonding State	Specifies whether VSB is globally enabled or disabled for the device.
Max Bonded Chassis	Specifies the non-configurable maximum number of supported physical chassis that can be bonded into a single VSB system. Current maximum bonded chassis value is 8.
Max Bonded System Slot	Specifies the maximum number of slots supported in the VSB system.
Slots active in System	Specifies all active and enabled slots in the system.
Bonding Admin System MAC	Specifies the administratively configured system MAC address for use with VSB.
Bonding Oper System MAC	Specifies the operational system MAC currently used by VSB system.
Link Failure Response	Specifies whether the Link Failure Response (LFR) protocol is enabled or disabled for the system. See set bonding lfr.
Chassis	Specifies the Chassis ID for each physical chassis in the VSB. set bonding chassis.
System Identifier	Identifies the Virtual Switch Bond to which the chassis belongs. set bonding chassis.
Serial Number	Specifies the serial number of the physical chassis.
Status	Specifies the status of the chassis in the VSB system: Up = Chassis is active in VSB system Down = Chassis is not present in a VSB system Incomplete = Chassis is not bonded to all VSB members Inactive = Indicates the chassis is present but not active in the VSB system
Active Slot IDs For This Chassis	Specifies the active and enabled slots in the chassis.
Shared Secret	Specifies whether a shared secret has been configured for the chassis. See set bonding chassis.
LFR priority	Specifies the LFR priority configured for this device. Defaults to 10 times the VSB chassis ID. See set bonding chassis.
Port	Specifies a Port ID belonging to the VSB. See set bonding enable.
Admin Status	Specifies the configured VSB state for the port (enabled/disabled).
Partner Port	Specifies the VSB interconnect port that this port is connected to.
Oper Mode	Specifies the VSB operational state for this VSB interconnect port.
Oper Status	Specifies the current operational state for a VSB port. up = Port is up and operational for VSB down = port is operationally down Port is operationally down for any of the following” high latency probe loop probe timeout port instability