Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear spantree stpmode

Use this command to reset the Spanning Tree protocol mode to the default setting of IEEE802.1. This re-enables Spanning Tree.

Syntax

clear spantree stpmode

Parameters

None.

Defaults

None.

Mode

All command modes.

Example

This example shows how to enable Spanning Tree by resetting the STP mode to IEEE 802.1:

System(rw)->clear spantree stpmode
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page