clear pwa maxrequest

Use this command to reset the allowed maximum request failed to the default value.

Syntax

clear pwa maxrequest [port-string]

Parameters

port-string

(Optional) Resets the maximum requests for specific port(s). For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide.

Defaults

If port-string is not specified, the maximum requests value is reset on all ports.

Mode

All command modes.

Example

This example shows how to clear the PWA maximum requests for port ge.1.1:

System(rw)->clear pwa maxrequest ge.1.1
System(rw)->show pwa ge.1.1
PWA Status                  - disabled
.
.
.
Port     Mode              AuthStatus      QuietPeriod  MaxReq
-------- ----------------  --------------  -----------  -----------
ge.1.1   disabled           disconnected    60           16
System(rw)->

Published May 2016prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback