Use this command to remove the multicast ARP learning restriction on an interface.
None.
None.
Configuration command, Interface configuration command mode.
As specified in RFC 1812, by default the router must not believe any ARP packet that claims the packet MAC address is broadcast or multicast. Use this command to remove the multicast restriction. The broadcast restriction remains unchanged.
The “no” form of this command reinstates the multicast restriction for ARP packets.
This example shows how to remove the multicast restriction for ARP packets:
System(rw-config)->interface vlan 1 System(rw-config-intf-vlan.0.1)->ip multicast-arp-learning
Print
this page
Email this topic
Feedback
View PDF
Download EPUB