Use this command to create an ICMP timing probe and enter probe timing configuration mode.
| probe-name | Specifies a ICMP timing probe name. Valid values are up to 31 characters. The space character is not supported. |
None.
Global configuration.
The ICMP timing probe allows you to collect timing information for ICMP echo requests. After you execute this command, you enter probe timing configuration mode where you can further configure the probe.
The no form of the command deletes the probe from the Tracked Object Manager.
This example creates the ICMP timing probe named ICMP_STATS and enters probe timing configuration mode.
System(su)->configure System(su-config)->probe ICMP_STATS icmp timing System(su-config-probe-timing)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB