Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

clear vlan constraint

Use this command to clear a constraint applied to a VLAN.

Syntax

clear vlan constraint vlan-list set-num

Parameters

vlan-list Specifies the VLAN(s) for which to clear the constraint.
set-num Specifies the constraint set ID to be cleared.

Defaults

None.

Mode

All command modes.

Example

This example shows how to clear constraint 3 from VLAN 1:

System(rw)->clear vlan constraint 1 3
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page