Use this command to administratively set an SNMP engine ID.
| id | Specifies a new SNMP engine ID for this device. Valid values are up to 27 bytes of text or hex characters. For example sys1 or 15:f8:3a. |
None.
All command modes.
Changes to the SNMP engine ID require a device reset to take effect. All SNMP user configuration must be removed before resetting the SNMP engine ID.
If C2 security mode is enabled, you can not create, modify, or delete an SNMP engine ID configuration while in Read-Write user mode.
This example shows how to reset the SNMP engine ID to DocumentationS- K- and 7100-Series1eng1:
System(rw)->set snmp engineid DocumentationS- K- and 7100-Series1eng1 Warning: Changes to the Engine ID require a device reset to take effect. Warning: All SNMP user configuration must be removed before resetting. System(rw)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB