Use this command to show the Spanning Tree priority for one or more ports. Port priority is a component of the port ID, which is one element used in determining Spanning Tree port roles.
| port port-string | (Optional) Specifies the port(s) for which to display Spanning Tree priority. For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
| sid sid | (Optional) Displays port priority for a specific Spanning Tree identifier. Valid values are 0 - 4094. If not specified, SID 0 is assumed. |
All command modes.
This example shows how to display the port priority for ge.2.7:
System(rw)->show spantree portpri port ge.2.7 Port ge.2.7 has a Port Priority of 128 on SID 0
Print
this page
Email this topic
Feedback
View PDF
Download EPUB