Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set system location

Use this command to identify the location of the system.

Syntax

set system location [string]

Parameters

string (Optional) Specifies a text string that indicates where the system is located.

A text string containing one or more spaces must be enclosed in quotes as shown in the example below.

Defaults

If string is not specified, the location name will be cleared.

Mode

All command modes.

Example

This example shows how to set the system location string:

System(rw)->set system location “Bldg N32-04 Closet 9”
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page