Use this command to display the MAC address(es) for one or more ports.
| port-string | (Optional) Displays MAC addresses for specific port(s). For a detailed description of possible port-string values, refer to Port String Syntax Used in the CLI in the S-, K-, and 7100 Series Configuration Guide. |
If port-string is not specified, MAC addresses for all ports will be displayed.
All command modes.
These are port MAC addresses programmed into the device during manufacturing. To show the MAC addresses learned on a port through the switching process, use the show mac command as described in show mac.
This example shows how to display the MAC address for ge.2.4:
System(rw)->show port mac ge.2.4 Port MAC Address ------------ ---------------------- ge.2.4 00-01-F4-DA-32-FE
Print
this page
Email this topic
Feedback
View PDF
Download EPUB