show ipv6 slb info

Example

This example shows how to display IPv6 server load balancing information:

System(rw)->show ipv6 slb info
Object               System Max    Avail VRF Used
--------------------------------------------------
Virtual-IPs                1000      996        4
Reals                       800      790       10
Sfarms                      400      398        2
Vservers                    500      496        4
TFTP Control Port:   69
FIN/RST Timeout:     Disabled
Real-Server Access:  Restricted
Real-Server Access Tcp Reset: Disabled
Real-Server Access Acl: Not Set
TCP Half-Close uses FIN/RST Timeout: Disabled
System(rw)->