Use this command to set the number of seconds that the firmware waits for a RADIUS response frame to be returned from the RADIUS server, after successfully snooping a RADIUS request frame from the client.
| seconds | Specifies the number of seconds that the firmware waits from the time it successfully snoops a RADIUS request frame, for a RADIUS response frame to be returned from the RADIUS server. Default: 20 |
None.
All command modes.
If no response is seen before the timeout expires, the session is terminated.
This example shows how to set the RS timeout to 30 seconds:
System(rw)->set radius-snooping timeout 30
Print
this page
Email this topic
Feedback
View PDF
Download EPUB