Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

set netflow export-interval

Use this command to configure the NetFlow export interval.

Syntax

set netflow export-interval interval

Parameters

interval Set the active flow timer value, between 1 to 60 minutes. The default value is 30 minutes.

Defaults

None.

Mode

All command modes.

Usage

Each S- or K-Series blade in the system will transmit a NetFlow packet when:

  • It has accumulated the maximum number of NetFlow records per packet, which is 20, or
  • It has accumulated fewer than 20 NetFlow records and the active flow timer has expired, or
  • The flow expires (ages out or is invalidated).

Example

This example shows how to set the NetFlow export interval to 10 minutes:

System(rw)->set netflow export-interval 10
Published May 2016prev | next

Email this topicEmail this topic

Print this pagePrint this page