show mvrp counters (Currently Cloaked)

Use this command to display MVRP counters for transmit and receive MRVP PDU errors due to VID translation configuration for one or more ports.

Syntax

show mvrp counters [port-string]

Parameters

port-string (Optional) Displays MVRP counters information for specific port(s). For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide.

Defaults

If port-string is not specified, MVRP counters information will be displayed for all ports.

Mode

All command modes.

Example

This example shows how to display MVRP transmit and receive MRVP PDU errors due to VID translation on ports 1 through 3 for slot 1:

System(rw)->show mvrp counters ge.1.1-3
Port Number    Rx VID Translation Errors    Tx VID Translation Errors
-----------    -------------------------    -------------------------
ge.1.1         0                            0
ge.1.2         0                            0
ge.1.3         0                            0

show garp timer configuration Output Details provides an explanation of the command output.

Click to expand in new window

show garp timer configuration Output Details

Output... What it displays...
Port Number Specifies the port designation for this MVRP counters information entry. For a detailed description of possible port-string values, refer to the S-, K-, and 7100 Series Configuration Guide.
Rx VID Translation Errors Specifies the number of MVRP receive errors due to VID translation.
Tx VID Translation Errors Specifies the number of MVRP transmit errors due to VID translation.