This command enters IPv6 address family mode and configures unicast or multicast modes for this OSPFv3 process.
| unicast | multicast | (Optional) Specifies that IPv6 is configured for either unicast or multicast. The default value is unicast. |
IPv6 unicast is the default address-family mode for OSPFv3 IPv6.
OSPFv3 Router Configuration.
The no address-family ipv6 command removes all topology configuration from this router configuration.
The following example enters the IPv6 multicast address family configuration mode:
System(su-config-ospfv3)->address-family ipv6 multicast System(su-config-ospfv3-af)->
The following example removes all topology configuration from this router configuration:
System(su-config-ospfv3)->no address-family ipv6 System(su-config-ospfv3)->
Print
this page
Email this topic
Feedback
View PDF
Download EPUB